Report Injuries
Press Releases
Virginia Graeme Baker Pool and Spa Safety Act
Pool Safety Resources:  Videos, Data, Publications, Posters, and Links
About CPSC
Join our E-mail Subscription List

Manufacturers of ASME/ANSI A112.19.8-2007 Approved Drain Covers and Sumps

The following companies, listed alphabetically, manufacture pool and spa drain covers of various sizes and have represented to CPSC staff that their covers meet the ASME/ANSI A112.19.8-2007 standard, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404(c)(1)(A)(i).

The staff is providing this information as a convenience to pool owners and operators. The CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.

(View a list of companies that manufacture safety vacuum release systems and field fabricated drain covers)

Last updated 07/07/2009

  • A&A Manufacturing
    Division of Shasta Industries Inc.
    3750 West Indian School Road
    Phoenix, AZ 85019
    Michael Marshall
    Tel: (800) 851-8492
    Fax: (602) 532-4896
    Michael.Marshall@aamfg.com
    www.aamfg.com
    www.UnblockableDrain.com
    Dimensions: 3 1/2" x 31" channel drain

  • AquaStar Pool Products Inc.
    1666 Garnet Ave #224
    San Diego, CA 92109
    Wade Arens
    Tel: (877) 768-2717, ext. 2
    Fax: (877) 276-POOL
    wade@aquastarpoolproducts.com
    www.aquastarpoolproducts.com
    www.UnblockableDrain.com
    Dimensions: 8" round, 10" round, 9"x9" square, 12"x12" square, 24"x24" square, 32"x 3 1/2" channel drain

  • Afras Industries Inc.
    766 Hampshire Road, Unit A
    Westlake Village, CA 91361
    Reza Afshar
    Tel: (805) 230-0011
    Fax: (805) 230-0062
    www.afrasinc.com
    Dimensions: 7 3/8" dia. ; 11.125" dia. and 12"x12"

  • BALBOA Water Group
    1382 Bell Ave
    Tustin, CA 92780
    Bob Spillar
    Tel: (714) 955-6240
    Fax: (714) 384-0335
    Bob.Spillar@BalboaWater.com
    www.BalboaWater.com

  • BeeSafe Systems
    795 W. Center St. #2
    Provo, UT 84601
    Bonnie Snow, Owner/CEO
    Tel: (801) 375-6881
    Tel: (888) 306-0121
    Fax: (801) 691-5761
    beesafesystems@gmail.com
    www.beesafesystems.com
    Dimensions: 46" Round

  • Color Match Pool Fittings
    15754 W. Christy Dr.
    Surprise, AZ 85379
    Todd Krombein
    Tel: (623) 337-4120
    Fax: (623) 337-4126
    todd@poolfittings.com
    sales@poolfittings.com
    www.poolfittings.com
    Dimensions: 8" Round, 10" Round.

  • Current Systems, Inc.
    621 Via Alondra Ste. 607
    Camarillo, CA 93012
    Tel: (866) 372-8886 (California)
    Tel: (888) 443-4113 (Florida)
    Fax: (805) 482-1041
    805-482-1041
    sales@current-systems.com
    www.current-systems.com
    Floor and Wall drain covers:18"x23" and 20"x44"
    Field fabricated sumps and grates available

  • Custom Molded Products, Inc.
    140 Celtic Blvd.
    Tyrone, GA 30290
    Tel: (770) 632-7112
    Fax: (770) 632-7115
    customer_service2@c-m-p.com
    www.c-m-p.com
    Pool Contact: Rich Simpson
    Sizes: 7-3/4” round, 8” round, 9” square, 12” square, 18” square
    Spa Contact: Bob Moore
    Sizes: 5” round

  • Drain Safe/New Water Solutions
    Ron Schroader
    Lake Worth, FL
    Tel: (561) 433-2580
    Ron@drainsafe.com
    www.drainsafe.com
    Dimensions: 11" diameter cover, will fit 5 1/2" - 8" Diameter Sumps, and retrofit smaller 5" sumps with additional knockouts

  • Eureka Manufacturing Co.
    PO Box 1473
    Bismarck, ND 58502
    Cathryn Binstock
    Tel: (701) 223-7932
    Fax: (701) 258-5423
    cathryn@eurekamanufacturing.com
    www.eurekamanufacturing.com

  • Hayward Pool Products
    620 Division Street
    Elizabeth NJ 07207
    Joe DiOrio, Product Manager
    Tel: (908) 355-7995
    jdiorio@haywardnet.com
    www.haywardnet.com/safety1
    Dimensions: 8" Round, 9"x9" Square, 12"x12" Square, 18"x18" Square

  • Healix Enterprises Inc.
    Design & Manufacturing
    3418 Industrial Parkway
    Jeffersonville, Ind. 47130
    Dan Healy
    1-800-337-5471
    healixent@mindspring.com
    Dimensions: 15” x 15” s/s grates for fittings from 4”-14” round, square or rectangular
    Made of 304 stainless steel
    Custom covers also available

  • Lawson Aquatics, Inc.
    4431 Corporate Square
    Naples, FL 34104
    Bob Fink, Product Manager
    Tel: (800) 897-6160 Tel: (239) 435-3700
    Fax: (239) 435-3708
    http://www.lawsonaquatics.com
    Dimensions: 6” Round Sump and Grate; 9”x9” Sump and Grate and 9”x9” Frame and Grate; 12"x12", 18"x18", 24 x24" (one inch increments in one direction and no more than 21" unsupported span in the other direction); and 18"x36" (and larger sizes in increments of 18")

  • Neptune-Benson, Inc.
    6 Jefferson Drive
    Coventry, RI 02816
    800-832-8002
    401-821-2200
    www.NeptuneBenson.com
    Steve Hawksley, Technical Services Direct
    shawksley@neptunebenson.com
    Dimensions: 30"x30" fiberglass AEGIS Shield, 100% perimeter suction

  • Paddock Pool Equipment Co., Inc.
    555 Paddock Parkway
    Rock Hill, SC 29730
    Todd Williams, Project Manager
    Tel: (800) 849-2729
    Fax: (803) 328-1160
    www.approvedmaindrains.com
    Dimensions: Raised frame grate: 20”x20” and 24”x 24”; Flat frame grate: 24”x 24”, 20”x40” (and larger sizes in increments of 20”) and 24" x 48” (and larger sizes in increments of 24”)

  • Paramount Pool and Spa Systems
    295 E. Corporate Place, Ste. 100
    Chandler, AZ 85225
    Dominic Conn, Director of Engineering
    Tel: (480) 893-7607
    DCONN@1paramount.com
    www.1paramount.com
    Dimensions: Will fit drains up to 10" diameter

  • Pentair Water Pool and Spa
    1620 Hawkins Avenue
    Sanford, NC 27330
    Tel: (800) 831-7133 (Customer Service)
    Tel: (800) 831-7133 (Technical Service)
    Fax: (919) 566-8926 (Customer Service)
    Steve Barnes
    Steve.Barnes@PentairWater.com
    www.PentairPool.com
    Dimensions: 8" round drain cover, fits frames over field built sumps and manufactured sumps

  • San Antonio Gary Equipment Company Inc.
    438 Sandau Road
    San Antonio, TX 78216-3621
    Tassie Zars
    Tel: (210) 341-5255
    Fax: (210) 341-5154
    www.GaryEquipment.com
    retro@garypools.com

  • Triodyne Safety Systems LLC.
    3054 N. Lake Terrace
    Glenview, Illinois 60025
    Tel: (847) 486-9640
    Fax: (847) 486-9645
    Pete Warner
    petew@triodyne.com
    www.antihairsnare.com
    Dimensions: 8" round drain cover

  • Waterway Plastics
    2200 E. Sturgis Rd.
    Oxnard, CA. 93030
    Ray Mirzaei, Certified Engineer
    Tel: (805) 981-0262
    waterway@waterwayplastics.com
    www.waterwayplastics.com
    Dimensions: 8" and 10" covers, 9"x9" and 12"x12" grates, 5" equalizer covers, 18" X 18" and 24" X 24" Grate & Frame, and Clover Design Suction Outlets

  • World Wide Sports LLC
    112 South Hanley Road
    Suite 101
    St. Louis, MO 63015-3418
    Harry Newhart
    Tel: (314) 863-0040
    www.worldwidesportsllc.com
    Dimensions: 13" diameter cover, fits 5" to 10" round

Manufacturers of ASME/ANSI A112.19.8a2008 Approved Figure 2 Sumps

  • A.S.A. Mfg. Inc.
    14879 S.W 111th St
    Dunnellon, FL 34432
    Tel: (800) 827-7665
    Fax: (352) 465-0239
    Todd DuPlessis
    todd@asamfg.com
    www.asamfg.com
    Dimensions: 9" x 9", 12" x 12", 18" x 18", 24" x 24" to Figure 2 dimensions.

 

Manufacturers of Field Fabricated Drain Covers

The following companies, listed alphabetically, claim the capability to manufacture field fabricated pool and spa drain covers to the requirements of the ASME/ANSI A112.19.8a-2007 standard, specifically section 2.3 Specific Design Requirements, as required by the Virginia Graeme Baker Pool and Spa Safety Act, Section 1404©(1)(A)(i). CPSC has not verified such claims. That responsibility rests with individual consumers.

The staff is providing this information as a convenience to pool owners and operators. CPSC does not provide approval or endorsements for any of these companies or their products. Other companies not listed may also manufacture products that meet the requirements of the law.

  • McNichols Company
    McNichols Company
    2502 N. Rocky Point Drive #950
    Tampa, Florida 33607-1421
    Bill Tuxhorn
    Ph: 813-282-3828 ext. 2241
    Fax: 813-288-9342
    Field-fabricated Fiberglass Grates
    Registered Design Engineer Resources (800) 237-3820